Set of 4 mainspring Clock Tools clamps keep a mainspring in the wound position to keep them under control. Best to get two of these sets for paired sized mainsprings.
Clock Mainspring Clamps Set of 4
$9.89
Set of 4 mainspring Clock Tools clamps keep a mainspring in the wound position to keep them under control. Best to get two of these sets for paired sized mainsprings.
In stock
Comparable products…
-
Clock Bubble Level
Bubble level for help to put a clock into beat or just level it for an even tick tock. If the clock is showing level but the tick and the tock are not even, please read 'how to put a clock in beat' in the help sections....CT33: $4.89
-
Clock Repair Movement Test Stand
Works great on testing mantle or wall clock movements. Durable, practical, adjustable and well made. ...CT21: $74.89
-
Clock Repair Tool and Part Magnetizer and Demagnetizer
This tool is easy to use and very effective. Stick the tool through it and the tool is now magnetized. Do it again and the tool is now demagnetized. Works great with the Multi-tip screwdriver. ...CT31: $9.89
-
Clock Mainspring Let Down Tool Set of 2
Used to release the power in a wound up mainspring. Key goes into the chuck and the chuck goes into the handle so you can let down the power of the spring. It does the same job as the let down with all the chucks. If someone were to take a spring driven clock apart without letting down the mainsprings, bad things may happen. The movement would get ruined and you can get your hands hurt. ...CT26: $29.89
-
0-25mm Micrometer for Clock Repair
Readings of 0-25mm micrometer. Good for reading the diameter or thickness of many clock parts. ...CT24: $14.89
-
Multiple Tip Screw Driver for Clock Repair
It is very useful to have a spinning top and be able to switch from various tips that are stored within the handle itself. Works great with the magnitizer we offer. ...CT30: $14.89
-
Steel Hammer with Nylon Heads
Nylon head on one end and brass on the other for lighter duty projects. The steel handle has good handle that is none slip. ...CT20: $14.89
-
Oiler & Oil
Precision pen oiler that is filled with cuckoo clock oil. The applicator makes it easy to oil hard to reach pivot holes....CT3: $9.89
-
Clock Mainspring Let Down Tool Set of 4
Handle with 3 chucks covers about every key size. Put the chuck into the handle and then release the mainspring in a slow controlled manner in your grip. This is done by putting the tool onto the key post arbor and then gently releasing the click that holds the mainspring wound up....CT25: $34.89
-
Clock Repair Staking Set
Clock Staking Set in a wooden closable container. These sturdy stakes have various hole diameters in the ends to fit the task at hand. ...CT22: $54.89
-
Clock Mainspring Clamps Set of 4
Set of 4 mainspring Clock Tools clamps keep a mainspring in the wound position to keep them under control. Best to get two of these sets for paired sized mainsprings. ...
CT2: $9.89
Related Products
Mantle Clock Case Back
$9.89
Hermle Clock Moon Gear
$14.89 – $19.89
Pin Vise Set
$14.89
Clock Repair Punch Set
$74.89
Clock Movement Seat Board Screws
$14.89 – $19.89
Digital Caliper Four Inch
$29.89
Clock Repair Staking Set
$54.89
Micrometer 0-25mm
$14.89
Clock Repair File Assortment
$14.89
