Steel Hammer with Nylon Heads

September 19, 2018 11:35 am Published by Leave your thoughts

$14.89

Nylon head on one end and brass on the other for lighter duty projects. The steel handle has good handle that is none slip.

In stock

Nylon head on one end and brass on the other for lighter duty projects. The steel handle has good handle that is none slip.

Additional information

Weight 0.125 lbs

Comparable products…

  • Clock Bubble Level Clock Bubble Level
    Bubble level for help to put a clock into beat or just level it for an even tick tock. If the clock is showing level but the tick and the tock are not even, please read 'how to put a clock in beat' in the help sections....

    CT33: $4.89

  • Multiple Tip Screw Driver for Clock Repair Multiple Tip Screw Driver for Clock Repair
    It is very useful to have a spinning top and be able to switch from various tips that are stored within the handle itself. Works great with the magnitizer we offer. ...

    CT30: $14.89

  • Oiler & Oil Oiler & Oil
    Precision pen oiler that is filled with cuckoo clock oil. The applicator makes it easy to oil hard to reach pivot holes....

    CT3: $9.89

  • Clock Mainspring Let Down Tool Set of 4 Clock Mainspring Let Down Tool Set of 4
    Handle with 3 chucks covers about every key size. Put the chuck into the handle and then release the mainspring in a slow controlled manner in your grip. This is done by putting the tool onto the key post arbor and then gently releasing the click that holds the mainspring wound up....

    CT25: $34.89

  • Clock Repair Tool and Part Magnetizer and Demagnetizer Clock Repair Tool and Part Magnetizer and Demagnetizer
    This tool is easy to use and very effective. Stick the tool through it and the tool is now magnetized. Do it again and the tool is now demagnetized. Works great with the Multi-tip screwdriver. ...

    CT31: $9.89

  • Clock Mainspring Let Down Tool Set of 2 Clock Mainspring Let Down Tool Set of 2
    Used to release the power in a wound up mainspring. Key goes into the chuck and the chuck goes into the handle so you can let down the power of the spring. It does the same job as the let down with all the chucks. If someone were to take a spring driven clock apart without letting down the mainsprings, bad things may happen. The movement would get ruined and you can get your hands hurt. ...

    CT26: $29.89

  • Screw Drivers Set of 6 LONG for Cuckoo and Clock Repair Screw Drivers Set of 6 LONG for Cuckoo and Clock Repair
    These are the best set to remove movements from there clock cases. They reach into the mantle clock cases and cuckoo cases very well. It is not easy to find a perfect length screwdriver with the right size head. ...

    CT37: $9.89

  • Steel Hammer with Nylon Heads Steel Hammer with Nylon Heads
    Nylon head on one end and brass on the other for lighter duty projects. The steel handle has good handle that is none slip. ...

    CT20: $14.89

  • 0-25mm Micrometer for Clock Repair 0-25mm Micrometer for Clock Repair
    Readings of 0-25mm micrometer. Good for reading the diameter or thickness of many clock parts. ...

    CT24: $14.89

  • Clock Repair Staking Set Clock Repair Staking Set
    Clock Staking Set in a wooden closable container. These sturdy stakes have various hole diameters in the ends to fit the task at hand. ...

    CT22: $54.89

  • Clock Repair Movement Test Stand Clock Repair Movement Test Stand
    Works great on testing mantle or wall clock movements. Durable, practical, adjustable and well made. ...

    CT21: $74.89