Shop

Showing 1–16 of 1028 results

• turned_in_out Time Only Clock Movements

  Time-Only Quartz Clock Movement

  These movements use quartz hands that are less than 12 inches long. When replacing a Time-only quartz clock Movement, measure the threads on the post. This is done on the old Low-Torque Quartz Clock Movement. Then match that measurement up for a new one. [bulk-discount-shortcode sku="M2"]

  M2: $14.00

  View Product

• turned_in_out Quartz Clock Movement Parts and Accessories

  Quartz Clock Movement Hardware

  Quartz clock movement hardware for battery operated time only clock movements. The hardware pack includes rubber washer, the brass washer, a hex nut, a doughnut, and a cap nut. This hardware pack is for threaded posts that are 5/16 wide only. This is what the hex nut will screw onto, the 5/16 wide post.

  Q-HW: $0.75

  Quartz Clock Movement Hardware quantity

  ADD TO CART

• turned_in_out Battery Clock Hands

  Spade Quartz Clock Hands #H2

  The hands are sold as a pair. So only measure the minute hand from the center of the mounting hole to the end. The minute hand has an oblong mounting hole, the hour hand has a round one.

  H2: $1.00 – $5.00

  View Product

• turned_in_out Suspension Springs

  Mechanical Clock Suspension Spring

  This is the most common suspension spring in use by far. Suspension A1 is for mantle clocks whereas A2 is for wall and grandmother units. The suspension A3 is for larger floor clocks such as a grandfather clock.

  SUS-A: $12.00 – $30.00

  View Product

• turned_in_out Quartz Clock Movement Parts and Accessories

  Quartz Clock Steel Hanger

  Steel hanger for hanging a quartz clock movement. This hanger allows the clock to hang on the wall without attaching anything to the case. Fits AA battery movements only.

  Q-HANG: $0.40

  Quartz Clock Steel Hanger quantity

  ADD TO CART

• turned_in_out Battery Clock Hands

  Serpentine Quartz Hands #H1

  Serpentine Quartz Hands #H1 will fit any battery clock movement from clockworks. The hour hand will have a round hole, and the minute hand will have an oblong hole.

  H1: $1.00 – $9.00

  View Product

• turned_in_out Time Only Clock Movements

  Quartz Battery Clock Movement

  These movements use quartz hands that are less than 12 inches long. To replace a AA battery quartz clock movement, measure the length of the post on the old movement. For hands over 12 inches you will need a c-cell movement. Hands sold separately.

  M2-B:

  View Product

• turned_in_out Battery Clock Hands

  Tapered Quartz Clock Hands #H4

  Tapered quartz clock hands for the time only units sold by Clockworks. The minute hand will have an oblong mounting hole and the hour hand is a round hole.

  H4: $1.00

  View Product

• turned_in_out Quartz Clock Second Hands

  Quartz Clock Second Hand

  Second hands for quartz clock movements that take a battery. Second hands come in Black, Gold, or Red. The measurement being from the mounting post all the way out to the tip. The measurement can also be done off of the clock face.

  SH3: $1.00

  View Product

• turned_in_out Quartz Clock Second Hands

  Quartz Clock Movement Second-Hand

  Second hands for quartz clock movements that take a battery. The second hands come in Black / Gold / or Red. They are measured from the mounting post to the end of the long side pointer of the hand.

  SH1: $1.00

  View Product

• turned_in_out Battery Operated Clock Movements

  Time – Pendulum Clock Movement

  This time and pendulum quartz clock movement will run a light weight pendulum that is 16 inches at longest. The quartz pendulum we offer is 16 inches (406mm) at its total length, however this can be shortened. The pendulum is a separate purchase. if you would like to purchase the pendulum with the unit shop here [bulk-discount-shortcode sku="QU3"]

  QU3: $16.00

  View Product

• turned_in_out Battery Clock Hands

  Flat-Tapered Quartz Clock Hands #H5

  Flat-Tapered quartz clock hands for time only clock movements sold by Clockworks. An hour hand with a round mounting hole for a friction fit.

  H5: $1.00 – $10.00

  View Product

• turned_in_out Suspension Springs

  Mechanical Clock Pendulum Suspension

  Suspension springs are the most commonly needed part for a pendulum on a mechanical clock. It is called a suspension because it suspends the pendulum and hanger aka leader in the air.

  SUS100:

  View Product

• turned_in_out Round Quartz Clock Inserts

  Clock Insert For 3in-Hole #F7

  Clock insert #F7 is a round friction fit clock that is 3 1/2 (90mm) wide. It fits snug in a 3 inch (76mm) hole, with an overall depth of 1 3/16 (30mm). [bulk-discount-shortcode sku="F7"]

  F7: $14.00

  View Product

• turned_in_out Quartz Clock Second Hands

  Second Hands for Battery-clocks

  For quartz clock movements that take a battery. The second hands come in Black, Gold, or Red. They are measured from the mounting post to the end of the long side pointer of the hand.

  SH2: $1.00

  View Product

• turned_in_out

  Clock Insert For 2-1/8-Hole #F3

  Clock insert #F3 is a round friction fit clock that is 2 1/4 (59mm) wide. It fits snug in a 2 1/8 (54mm) hole, with an overall depth of 1 1/16 (27mm). [bulk-discount-shortcode sku="F3"]

  F3: $14.00

  View Product