Search Results for Cuckoopendulum

14 Items Found

• Cuckoo Clock Not Striking

  The following is for when the new cuckoo clock movement will not go into striking mode for the hours. The bird will not come out and the clock will not indicate what time it is with the cuckoo call. Here are some guidelines on what to check in this situation. There is a wire above the cuckoo door. This closes... View Product

  LEARN MORE

• Ordering The Cuckoo Movement

  Offering post WW2 German made cuckoo clock movements, prior to this would be an antique. Antique cuckoo clocks made during and before the second war have movements that are no longer made. The only thing to do is get an overhaul on the movement by a clock maker. Email us for more specific information on these types of movements. As... View Product

  LEARN MORE

• Regula Cuckoo Movement Identification

  Most cuckoo clocks made after 1950 have movements that are made by the Regula cuckoo clock movement company. Any cuckoo clock made after this time has an 80 percent chance of being a Regula. Most of the time there will be identification markings that will reveal if it is a Regula cuckoo clock movement. But to be certain use these... View Product

  LEARN MORE

• Why a new cuckoo movement

  A new cuckoo clock movement will be a fraction of the price of an overhaul on the old one. This is due to the time it takes to separate the plates, work on the movement, and then put it all back together again. This process is very time consuming. Then, if the movement fails the testing process, it all has... View Product

  LEARN MORE

• How to install Cuckoo Clock Hands

  Installing the cuckoo clock hands bought from clockworks.com starts with removing the old hands. To remove the cuckoo hands you will only need a pair of needle nose pliers. While holding the minute hand still (longer of the two hands) loosen the minute hand nut with the pliers. Turn the hand nut in a counter clockwise direction while holding the... View Product

  LEARN MORE

• Cuckoo Clock Repair Parts

  The most common Cuckoo Clock Repair Parts sold are the bellow tops and the hands. The bellow tubes are usually good to reuse on the clock, just the bellow tops have cloth that rip over time and therefore the clock will not cuckoo the time out. If the cloth is torn, you do not need to replace the entire cuckoo... View Product

  LEARN MORE

• Cuckoo Strike Quantity Issues

  Issues with the strike quantity on a cuckoo clock is a common ailment upon setting up a new movement. The clock will strike 12 o’clock and then 12 again at 1 o’clock or something like this. This has to do with the mechanical components behind the clock dial. Remove the hands and dial to get to that section of the... View Product

  LEARN MORE

• Cuckoo Clock Movement Installation

  There is a lot going on in a tight area with cuckoo clocks. Above all, it takes some patience to get these right. The thing with cuckoo clocks is the more stuff going on, the harder it is to swap the cuckoo clock movement. Things like dancers, wood chopper, bell ringers, water wheels and the sort can complicate things. Take... View Product

  LEARN MORE

• Cuckoo clock door stuck open

  Upon installation of a new cuckoo clock movement this is a common issue. The Cuckoo clock door stuck open could be a number of things. Please check the following to see if it solves the issue of the door not closing all the way. If the pine cone weight that controls the cuckoo portion of the clock is not heavy... View Product

  LEARN MORE

• Replacing Cuckoo Bellow Tops

  The lift wires travel from the movement up to the flaps of the old bellow tops. Furthermore, these wires are taken off in order to remove the cuckoo bellows. Usually this is done by opening the loop on the lower end of the lift wire. This is where it connects to the movement's lift arm. Use a small flat head... View Product

  LEARN MORE

• Cuckoo Parts Information Tabs

  Post WW2 German cuckoo clock repair parts for the professional or hobbyist. Information on how to install these parts in a cuckoo clock. - Clockworks

  LEARN MORE

• Mechanical Cuckoo Clock Movement Replacement Information Tabs

  Post WW2 German cuckoo clock repair parts for the profesional or hobbyist. Information on how to install these parts onto a cuckoo clock. - Clockworks

  LEARN MORE

• Next