NEW 351-030 Clock Movement

September 19, 2018 3:35 pm Published by Leave your thoughts

$299.00

The Hermle clock movement 351-030 is a Westminster Chime unit with five chime hammers on the bottom of the movement.

This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

Clear

Description

Assistance = 800-381-7458

Selecting the movement

The numbers on the back plate of the movement is everything one needs to get a replacement. If the numbers match then the movement matches.

If the clock is a pendulum unit, be sure to select the proper CM length that matches the old unit.

Hermle 141 Series
  • Pendulum Unit
  • 33.2mm Hand shaft
  • 5 Hammer Side
  • Plate size 120 x 120mm
  • Factory Oiled
  • Less cost than a cleaning in most cases
  • Should last 25-30 years, a repair would not
  • Easy to install, we can help if needed
  • Ships same day as order

The Hermle clock movement 351-030 is a Westminster Chime unit with five chime hammers on the back of the movement.

This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

Notes on the Hermle 351 and 350 series

The Hermle 351 and 350 series is a spring driven westminster chime unit that takes a size #8 key. This is a square shaped movement with the movement plate size of 120 x 120mm. The 351-8** series is a two spring and one weight cable unit.

What is being offered on this page is the movement only with out the pendulum, gong or dial. These movement come as the movement itself with its hand nut and if a pendulum unit, comes with the suspension spring and leader.


This high quality weight driven German movement comes pre oiled and includes its leader, suspension spring and hand nut if its a pendulum unit.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

The German made movement comes pre oiled and includes its leader, suspension spring and hand nut.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

You will need to match up your CM length from the back plate of your old unit to the new one. The options indicated all that is available by stock. If there is a CM number you need but is not listed we can still create it most likely by changing some gears. If this is the situation please just give us a call 800 381 7458.



HERMLE MOVEMENT DIRECTORY

Hermle movement number starts with....

Additional information

Weight 4 lbs
CM Length

34cm, 43cm, 48cm, 55cm

You may also like…