Battery Operated Clock Movements

Showing 1–16 of 51 results

  • launch

    View Product

    View more

    turned_in_out Time Only Clock Movements

    Time-Only Quartz Clock Movement

    These movements use quartz hands that are less than 12 inches long. When replacing a Time-only quartz clock Movement, measure the threads on the post. This is done on the old Low-Torque Quartz Clock Movement. Then match that measurement up for a new one. [bulk-discount-shortcode sku="M2"]

    M2: $18.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Quartz Clock Movement Parts and Accessories

    Quartz Clock Movement Hardware

    Quartz clock movement hardware for battery operated time only clock movements. The hardware pack includes rubber washer, the brass washer, a hex nut, a doughnut, and a cap nut. This hardware pack is for threaded posts that are 5/16 wide only. This is what the hex nut will screw onto, the 5/16 wide post.

    Q-HW: $0.75
  • launch

    View Product

    View more

    turned_in_out Battery Clock Hands

    Spade Quartz Clock Hands

    The hands are sold as a pair. So only measure the minute hand from the center of the mounting hole to the end. The minute hand has an oblong mounting hole, the hour hand has a round one.

    H2: $1.00$5.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Quartz Clock Movement Parts and Accessories

    Quartz Clock Steel Hanger

    Steel hanger for hanging a quartz clock movement. This hanger allows the clock to hang on the wall without attaching anything to the case. Fits AA battery movements only.

    Q-HANG: $0.40
  • launch

    View Product

    View more

    turned_in_out Battery Clock Hands

    Serpentine Quartz Hands #H1

    Serpentine Quartz Hands #H1 will fit any battery clock movement from clockworks. The hour hand will have a round hole, and the minute hand will have an oblong hole.

    H1: $1.00$9.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Battery Clock Hands

    Tapered Quartz Clock Hands #H4

      Tapered quartz clock hands for the time only units sold by Clockworks. The minute hand will have an oblong mounting hole and the hour hand is a round hole.

    H4: $1.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Battery Clock Hands

    Flat-Tapered Quartz Clock Hands #H5

    Flat-Tapered quartz clock hands for time only clock movements sold by Clockworks. An hour hand with a round mounting hole for a friction fit.

    H5: $1.00$13.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Round Quartz Clock Inserts

    Clock Insert For 2-3/8-Hole #F4

    Clock insert #F4 is a round friction fit clock that is 2 3/4 (73mm) wide. It fits snug in a 2 3/8 (60mm) hole, with an overall depth of 1 inch (25.4mm). [bulk-discount-shortcode sku="F4"]

    F4: $14.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Round Quartz Clock Inserts

    Clock Insert For 3in-Hole #F7

    Clock insert #F7 is a round friction fit clock that is 3 1/2 (90mm) wide. It fits snug in a 3 inch (76mm) hole, with an overall depth of 1 3/16 (30mm). [bulk-discount-shortcode sku="F7"]

    F7: $14.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Quartz Clock Movement Parts and Accessories

    Quartz Clock Pendulum

    A quartz clock pendulum rod and bob. The bob comes in three sizes as listed on the order menu. Overall max length is 16 inches. This will work on any quartz clock movement offered by Clockworks.

    Q-BOB: $6.00$8.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Battery Clock Hands

    Diamond-shaped Quartz Clock Hands #H8

    Diamond-shaped quartz clock hands fit battery clock movements purchased from Clockworks. Minute hand has an oblong mounting hole whereas the hour hand has a round one.

    h8: $1.00$3.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Battery Clock Hands

    Straight Quartz Clock Hands #H6

    Straight quartz clock hands for the standard "I" shaft battery clock movements. These will fit any battery movement sold by Clockworks.

    H6: $1.00$2.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Round Quartz Clock Inserts

    Clock Insert For 1-3/8-Hole #F1

    Clock insert #F1 is a round friction fit clock that is 1 7/16 (37mm) wide. It fits snug in a 1 3/8 (35mm) hole, with an overall depth of 3/8 (10mm). [bulk-discount-shortcode sku="F1"]

    F1: $14.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Chiming Pendulum Quartz Clock Movements

    Premium Chime Clock Movement QU40

    Best sound quality on the market. This unit will chime as if it was a big grandfather clock. Also has volume control and an automatic night silence option. Please scroll down on this page to read all about it. 4 9/16″ x 4 3/4″ x 1 1/8″ [bulk-discount-shortcode sku="QU40P"]

    QU40P-B:
    View Product
  • launch

    View Product

    View more

    turned_in_out Battery Clock Hands

    Fancy Quartz Clock Hands #H9

    Fancy quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from clockworks.com, these will fit. We only carry the "I" shaft units.

    H9: $1.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Chiming Pendulum Quartz Clock Movements

    Pendulum Quartz Clock Movement QU3

    Time and pendulum quartz clock movement, pendulum and hands sold separate. This is a strong unit that can run hands up to 11 inches long. This is the length of the minute hand from the mounting hole to the end. 2 1/8″ x 3 3/4″ x 7/8″ [bulk-discount-shortcode sku="QU3"]