Wood Handle Hammer When staking or working on a mechanical clocks outer plates the choice of hard or soft tip come in very useful. This hammer has two sides, it has either a nylon end or a brass end.
Nyon and Brass Hammer with Wooden Handle
$19.89
Wood Handle Hammer
When staking or working on a mechanical clocks outer plates the choice of hard or soft tip come in very useful. This hammer has two sides, it has either a nylon end or a brass end.
In stock
Comparable products…
-
Clock Repair Small Plier Set
6pc pliers with various shaped ends for crimping or cutting. Very useful to get into tight places when locking in pivots or wire bending. ...CT38: $14.89
-
Clock Mainspring Let Down Tool Set of 4
Handle with 3 chucks covers about every key size. Put the chuck into the handle and then release the mainspring in a slow controlled manner in your grip. This is done by putting the tool onto the key post arbor and then gently releasing the click that holds the mainspring wound up....CT25: $34.89
-
Screw Drivers Set of 6 LONG for Cuckoo and Clock Repair
These are the best set to remove movements from there clock cases. They reach into the mantle clock cases and cuckoo cases very well. It is not easy to find a perfect length screwdriver with the right size head. ...CT37: $9.89
-
Clock Repair Tool and Part Magnetizer and Demagnetizer
This tool is easy to use and very effective. Stick the tool through it and the tool is now magnetized. Do it again and the tool is now demagnetized. Works great with the Multi-tip screwdriver. ...CT31: $9.89
-
Multiple Tip Screw Driver for Clock Repair
It is very useful to have a spinning top and be able to switch from various tips that are stored within the handle itself. Works great with the magnitizer we offer. ...CT30: $14.89
-
Clock Repair Staking Set
Clock Staking Set in a wooden closable container. These sturdy stakes have various hole diameters in the ends to fit the task at hand. ...CT22: $54.89
-
Oiler & Oil
Precision pen oiler that is filled with cuckoo clock oil. The applicator makes it easy to oil hard to reach pivot holes....CT3: $9.89
-
Clock Bubble Level
Bubble level for help to put a clock into beat or just level it for an even tick tock. If the clock is showing level but the tick and the tock are not even, please read 'how to put a clock in beat' in the help sections....CT33: $4.89
-
0-25mm Micrometer for Clock Repair
Readings of 0-25mm micrometer. Good for reading the diameter or thickness of many clock parts. ...CT24: $14.89
-
Clock Mainspring Let Down Tool Set of 2
Used to release the power in a wound up mainspring. Key goes into the chuck and the chuck goes into the handle so you can let down the power of the spring. It does the same job as the let down with all the chucks. If someone were to take a spring driven clock apart without letting down the mainsprings, bad things may happen. The movement would get ruined and you can get your hands hurt. ...CT26: $29.89
-
Clock Repair Movement Test Stand
Works great on testing mantle or wall clock movements. Durable, practical, adjustable and well made. ...CT21: $74.89
Related Products
Clock Bushing Assortment
$14.89
Clock Verge Assortment
$14.89
Magnetizer Demagnetizer
$9.89
Pin Vise Set
$14.89
Hexagonal Staking Block
$24.89
Digital Caliper Four Inch
$29.89
Clock Hairspring Assortment
$29.89
Clock Repair File Assortment
$14.89
Clock Repair Punch Set
$74.89
