Clock Insert For 3in-Hole #F7

Clock Insert For 3in-Hole #F7

(13 reviews)

$14.00

-

Clock Insert For 3 inch Hole #F7

Clock insert #F7 is a round friction fit clock that is 3 1/2 (90mm) wide. It fits snug in a 3 inch (76mm) hole, with an overall depth of 1 3/16 (30mm).

Minimum unitsPrice/unit
1$14
5$13
12$12
50$11
Read more »
Bulk discount available

Clock Insert

Clock insert #F7 is a round friction fit clock that is 3 1/2 (90mm) wide. It fits snug in a 3 inch (76mm) hole, with an overall depth of 1 3/16 (30mm).
  • 3 year guarantee
  • Takes 1 AA battery
  • White Dial Arabic or Roman
  • Curved lens
  • 3 year guarantee
  • Clock Insert For 3in-Hole #F7
Minimum unitsPrice/unit
1$14
5$13
12$12
50$11

Friction Fit Clock Inserts

Friction fit clock inserts fit into an existing hole. In other words, drill a hole into any object and just push the clock insert into it. The insert alone will be too loose of a fit so there is a rubber ring on the back side to fill the gap.

Sometimes the rings will break or get lost and a simple solution is a rubber band. Slide a rubber band on the backside of the insert and we are good to go! It ends up being a nice fit with some tolerance in the hole diameter requirement.

Colors and Styles

Clockworks provides options for the dial (face) colors and also numeral styles in Arabic or Roman for the friction fit clock insert. For those who do not remember, the Roman numerals are where 12 will be show as XII or Arabic as 12.

The new way to express the number 4 in Roman numerals is no longer IV but rather IIII. This is quite disconcerting to some people who grew up with using Roman numerals.

Please note, the hand color on these units may vary from black to gold depending on the dial color and insert item number.

Clock insert construction

Generally speaking, the smaller friction fit clock insert have a more durable construction. Clock inserts with a diameter of 2" or less have a stainless steel back and metal alloy bezel. These small inserts also have a glass lens instead of plastic.

In addition, the larger inserts are all made with plastic components. The plastic can scratch. Be careful when cleaning the face of the clock. If it does get a scratch, get a new insert. Replacement lenses for friction fit clock insert are not available .

In fact, sometimes when the bezel is taken off, it will not go back on. Some styles do have bezels that screw on and off but for the most part, consider the insert broken if the bezel comes off.

Additional information

Weight0.25 lbs
Color

White Dial with Gold Trim, Gold Dial with Gold Trim, Ivory Dial with Gold Trim

Numerals

Arabic, Roman

26
Ask a Clock Question

Subscribe
Notify of
guest

newest
oldest most voted
Inline Feedbacks
View all comments
evelyn j friedman
evelyn j friedman
3 months ago

hello

I have a clock that has a 3in hole but the rim that the clock fits into is 3-3/8. Do you think that the clock insert for a 3in hole will work?

Jerry Severns
Jerry Severns
4 months ago

I need a replacement clock works that will insert into a 3 1/2 inch hole

Arnold
Arnold
5 months ago

Does Clock Insert For 3in-Hole #F7 have an alarm? If not do any inserts have an alarm?

M. Corbett
M. Corbett
7 months ago

Do you have a clock insert that fixes a 3 inch opening but has a clock face of 5 inches

Jim
Jim
1 year ago

Do you have a movement for Howard miller 613-239 . It’s a quarts with a separate second hand

Thomas Piper
Thomas Piper
1 year ago

Do you have an insert that fits a carefully measured 2-7/8 dia. hole

Bill Wells
Bill Wells
1 year ago
Rating :
     

Do you have a 3″ clock fitup that is illuminated or backlit?

Thank you

Steven Fanucci
Steven Fanucci
1 year ago
Rating :
     

Thank you for the help finding this.

Carl
Carl
2 years ago

I have a wooden clock frame that’s sets on a desk etc… the backside hole measures 3 15/16 the out side has a smaller piece of wood mounted that brings the size down to 3 5/8. There was once a movement in the space but got broken. How do I find something to fit this hole?

James Franks
James Franks
2 years ago

Do you have a clock that fits into a 3 3/16” hole that’s cut into a piece of 3/8” glass

Phillip Rockstroh
Phillip Rockstroh
2 years ago

Do you have any inserts that are nickel finish? The gold is so dated?

Manuel Pereda
Manuel Pereda
3 years ago

I need part clock insert for Herman Miller Model 645-578 desktop clock. Please advise. The hole is 3 1/2 inches.

Gary Gabauer
Gary Gabauer
3 years ago

Do you have a battery friction insert for a 3.5 inch hole that is 1 3/16 inches deep? It is cut into a piece of marble. Thank you.