Clock Insert For 1-3/8-Hole
Clock Insert For 1-3/8-Hole
Quartz clock insert by clockworks.com
Quartz clock insert by clockworks.com
Quartz clock insert by clockworks.com
Quartz clock insert by clockworks.com
#F1 Clock Insert for a 1 3/8 Hole

Clock Insert For 1-3/8-Hole #F1

(19 reviews)

$14.00

-

Clock Insert For 1-3/8-Hole #F1

Clock insert #F1 is a round friction fit clock that is 1 7/16 (37mm) wide. It fits snug in a 1 3/8 (35mm) hole, with an overall depth of 3/8 (10mm).

Minimum unitsPrice/unit
1$14
5$13
12$12
50$11
Read more »
Bulk discount available

Clock Insert For 1-3/8-Hole #F1

Clock Insert For 1-3/8-Hole #F1 is a round friction fit clock that is 1 7/16 (37mm) wide. It fits snug in a 1 3/8 (35mm) hole, with an overall depth of 3/8 (10mm).

  • Exceptional quality
  • Battery included
  • Stainless steel back
  • Glass crystal
  • 3 year guarantee
  • Clock Insert For 1-3/8-Hole
Minimum unitsPrice/unit
1$14
5$13
12$12
50$11

Friction Fit Clock Inserts

Friction fit clock inserts fit into an existing hole. In other words, drill a hole into any object and just push the clock insert into it. The insert alone will be too loose of a fit so there is a rubber ring on the back side to fill the gap.

Sometimes the rings will break or get lost and a simple solution is a rubber band. Slide a rubber band on the backside of the insert and we are good to go! It ends up being a nice fit with some tolerance in the hole diameter requirement.

Colors and Styles

Clockworks provides options for the dial (face) colors and also numeral styles in Arabic or Roman for the friction fit clock insert. For those who do not remember, the Roman numerals are where 12 will be show as XII or Arabic as 12.

The new way to express the number 4 in Roman numerals is no longer IV but rather IIII. This is quite disconcerting to some people who grew up with using Roman numerals.

Please note, the hand color on these units may vary from black to gold depending on the dial color and insert item number.

Clock insert construction

Generally speaking, the smaller friction fit clock insert have a more durable construction. Clock inserts with a diameter of 2" or less have a stainless steel back and metal alloy bezel. These small inserts also have a glass lens instead of plastic.

In addition, the larger inserts are all made with plastic components. The plastic can scratch. Be careful when cleaning the face of the clock. If it does get a scratch, get a new insert. Replacement lenses for friction fit clock insert are not available .

In fact, sometimes when the bezel is taken off, it will not go back on. Some styles do have bezels that screw on and off but for the most part, consider the insert broken if the bezel comes off.

Additional information

Weight0.25 lbs
Color

White Dial with Gold Trim, Ivory Dial with Gold Trim, Gold Dial with Gold Trim

Numerals

Arabic, Roman

41
Ask a Clock Question

Subscribe
Notify of
guest

newest
oldest most voted
Inline Feedbacks
View all comments
Ed Hudson
Ed Hudson
3 months ago

What is the battery number for replacement?

Ed Hudson
Ed Hudson
3 months ago

What battery do I buy to replace the dead battery?

jonfhart9821
jonfhart9821
4 months ago

Please provide instructions on how to adjust the time for a 1-3/8” clock fitup.

Jon F Hart
Jon F Hart
4 months ago
Reply to  jonfhart9821

Thank you for your response, however, the 1-3/8” fitup does not have a winding stem.

Ronald E Stoner
Ronald E Stoner
4 months ago

I need a replacemen insert with hole diameter 1 3/16 inch. Do you have one?

John Purcell
John Purcell
7 months ago

HI I HAVE A SMALL PRIMEX CLOCK MODEL15278 THAT I JUST BOUGHT AND IT APPEARS IT NEEDS A BATTERY WHICH I DO NOT WANT TO DAMAGE THE CLOCK GETTING THE BACK OFF AND WONDERED IF YOU COULD HELP ME ON THE REMOVAL OF THE BACK AND THE TYPE OF BATTERY TO USE IT IS 1 7/16 WIDE THANK YOU

John Purcell
John Purcell
7 months ago
Reply to  John Purcell

THANK YOU.JOHN

Pat Rossi
Pat Rossi
10 months ago

What size battery does it take and can the batteries be replaced?

Rochelle Lutz
Rochelle Lutz
1 year ago
Rating :
     

I just sent a question and I believe the size I gave you is incorrect.. its more then a half inch. I have no caliphers to measure it with.

Rochelle Lutz
Rochelle Lutz
1 year ago

I have a Collectible Lenox Miniature Clock, a Guitar, with an Elgin Miniature clock in it. if I am meauring it right it is like 6/16ths I know its under an inch. the number inside the back, is 09-1999, if that is any help. would you have something to fit this clock, it probably still works if I put in a new battery, but the hands fell off inside the face and I, nor a jeweler could get it out to re attach them.. So I think I need a whole new replacement clock.. the battery I have covered, but if you need to know its a SR621SW. Can you help me?

ryah radomski
ryah radomski
2 years ago

Do the motors on your small insert clocks come in a continuous sweep or step? I’m looking for a silent continuous sweep.

Mark
Mark
2 years ago

Do you have a small clock mvt. That measures :top bezel 35mm diameter. Movement portion is 30mm diameter. Depth of entire mvt. Is 9mm

steven
steven
3 years ago
Rating :
     

Thank you for the perfect fit up!

Florence Bow
Florence Bow
3 years ago

How do I purchase small clock insert replacement

Jo Baygents
Jo Baygents
3 years ago

I have a Sterling & Noble alarm clock, and I lost the stem that turns the alarm “arm”. Where can I find a replacement?

Christine Mellgoza
3 years ago

How to replace the battery

Scott Hornish
3 years ago

SKU: F1 Categories, what size battery fits in this clock. I have desk item with this clock inserted but the battery is gone and I can’t find the size noted anywhere on the clock back.

Diane Barsanti
3 years ago

Does the stem pull out to change the time?

James Meek
James Meek
3 years ago

How do you replace the battery ?

Libby Moyer
2 years ago

Is there a picture somewhere? I need to change the battery on one and have been 20 minutes trying to figure out how to open it.

Curt S
Curt S
4 years ago

What is the size of the battery in a Hicarer 1.8 Inch (45 mm) Round Quartz Clock?

Tom L.
Tom L.
4 years ago

Looking for clock insert (mantle clock), friction fit with: 3-7/8″ (could do 4″) diameter ring, but limited with 2-1/4″ hole size , maximum 5/8″ depth. Hated to start making modifications to the wood body. Do you have anything that fits?