Clock Insert For 1-3/16-Hole
Clock Insert For 1-3/16-Hole
Quartz clock insert by clockworks.com
Quartz clock insert by clockworks.com
Quartz clock insert by clockworks.com
Quartz clock insert by clockworks.com
#F1A Clock Insert for a 1 3/16 Hole

Clock Insert For 1-3/16-Hole #F1A

(9 reviews)

$14.00

-

Clock Insert For 1-3/16-Hole #F1A

Clock insert #F1A is a round friction fit clock that is 1 5/16 (33mm) wide. It fits snug in a 1 3/16 (30mm) hole, with an overall depth of 5/16 (7mm).

Minimum unitsPrice/unit
1$14
5$13
12$12
50$11
Read more »
Bulk discount available

Clock Insert For 1-3/16-Hole #F1A

Clock insert #F1A is a round friction fit clock that is 1 5/16 (33mm) wide. It fits snug in a 1 3/16 (30mm) hole, with an overall depth of 5/16 (7mm).

  • Exceptional quality
  • Battery included
  • Stainless steel back
  • Glass crystal
  • 3 year guarantee
  • Clock Insert For 1-3/16-Hole
Minimum unitsPrice/unit
1$14
5$13
12$12
50$11

Friction Fit Clock Inserts

Friction fit clock inserts fit into an existing hole. In other words, drill a hole into any object and just push the clock insert into it. The insert alone will be too loose of a fit so there is a rubber ring on the back side to fill the gap.

Sometimes the rings will break or get lost and a simple solution is a rubber band. Slide a rubber band on the backside of the insert and we are good to go! It ends up being a nice fit with some tolerance in the hole diameter requirement.

Colors and Styles

Clockworks provides options for the dial (face) colors and also numeral styles in Arabic or Roman for the friction fit clock insert. For those who do not remember, the Roman numerals are where 12 will be show as XII or Arabic as 12.

The new way to express the number 4 in Roman numerals is no longer IV but rather IIII. This is quite disconcerting to some people who grew up with using Roman numerals.

Please note, the hand color on these units may vary from black to gold depending on the dial color and insert item number.

Clock insert construction

Generally speaking, the smaller friction fit clock insert have a more durable construction. Clock inserts with a diameter of 2" or less have a stainless steel back and metal alloy bezel. These small inserts also have a glass lens instead of plastic.

In addition, the larger inserts are all made with plastic components. The plastic can scratch. Be careful when cleaning the face of the clock. If it does get a scratch, get a new insert. Replacement lenses for friction fit clock insert are not available .

In fact, sometimes when the bezel is taken off, it will not go back on. Some styles do have bezels that screw on and off but for the most part, consider the insert broken if the bezel comes off.

Additional information

Weight0.25 lbs
Color

White Dial with Gold Trim, Ivory Dial with Gold Trim

Numerals

Arabic, Roman

13
Ask a Clock Question

Subscribe
Notify of
guest

newest
oldest most voted
Inline Feedbacks
View all comments
Mike
Mike
8 months ago

I’m looking for a mini clock insert for a 7/8 inch hole.

Marvin
Marvin
10 months ago

Will the clock insert of 1 3/16” hole fit in a small Fenton clock as a replacement?

bob hamilton
bob hamilton
1 year ago

clock insert 4 1/4 diameter..battery operated…mantel airplane prop 1940 / 1950 era..

John
John
1 year ago

Will knob fit in 1 3/16 hole

MJC
MJC
2 years ago

I have a green marble clock with a circular hole diameter 1-5/16″ and 7/16″ deep. Will the F1A which measures at a 1-3/16″ diameter fit properly with the rubber ring?

steven
steven
3 years ago
Rating :
     

Thank you for the perfect fit up!

Garry A Nelson
3 years ago

Is the 1 3/16″ whole #F1A round clock insert available with silver trim?

Garry A Nelson
3 years ago

Is the the 1 3/16″ hole #F1A available with silver trim?