#QU30NP Chiming Seiko Quartz Clock Movement

September 19, 2018 11:36 am Published by Leave your thoughts

$49.89

Automatic night silence switch
NON Pendulum
Takes one C cell battery
Seiko durability
Detachable speaker
5/16 Diameter post
Please choose length of post

Quality C cell dual chime movement by Seiko. Will play either Westminster or Whittington on the quarter hour.

Please select the free hands from the next page if you need them, just click Add To Cart and they will show up.

1-3 Units = $45.00
4-11 Units = $42.00
12 Units = $38.00

Clear
Bulk discount available
   

#QU30 Chiming Seiko Clock Movement

  Quality C cell dual chime movement by Seiko. Will play either Westminster or Whittington on the quarter hour. Available in a variety of post lengths, with or without a pendulum. Check out the sound samples below:   Westminister Sound Sample Whittington Sound Sample   Dimensions of the movement: 2 1/2' x 3 1/4' x 1 1/2' Already own one and want help setting it up? Here are your instructions instructions

Wholesale Discounting (reflected at checkout)

  • 1-4 Units = $45.00
  • 4-11 Units = $42.00
  • 12 Units = $38.00
 

How to make the clock chime when its supposed to.

First we need to know, the clock chime is correct no matter what it says the chime is, its right. We only need to have the hands point to where the clock thinks it is, or where its chiming in other words. And then set the clock to time.

So to point the hands to where the clock chimed we need to remove the hands, and put them back on the clock where the clock chimed. In other words if it chimed out that its 3 oclock, put the hour hand to the three and the minute hand to the 12.

IF the clock minute hand will not point exactly to the 12, do this. Find the circle spinning setting knob on the back of the movement and hold this still with your fingers so it will not move. At the same time you stop this from moving, point the minute hand to the 12 where it was supposed to point to when it chimed. Let go of both.

Commonly bought with..

  • quartz clock hand 10B #H10 Quartz Clock Hands
    Quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from us, these will fit. We only carry the "I" shaft units. What this means is the hour hand will have a round hole, and the minute hand will have an oblong hole. The oblong hole just fits over the movements "I" post and than the nut goes on top to hold it down. The hands are measured by the minut...

    Clear

    H10: $0.89

  • quartz clock hands 11B #H11 Quartz Clock Hands
    Quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from us, these will fit. We only carry the "I" shaft units. What this means is the hour hand will have a round hole, and the minute hand will have an oblong hole. The oblong hole just fits over the movements "I" post and than the nut goes on top to hold it down. The hands are measured by the minut...

    Clear

    H11: $0.89

  • quartz clock hands 12B #H12 Quartz Clock Hands
    Quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from us, these will fit. We only carry the "I" shaft units. What this means is the hour hand will have a round hole, and the minute hand will have an oblong hole. The oblong hole just fits over the movements "I" post and than the nut goes on top to hold it down. The hands are measured by the minut...

    Clear

    H12: $0.89

  • quartz clock hand 1 #H1 Quartz Clock Hands
    Quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from us, these will fit. We only carry the "I" shaft units. What this means is the hour hand will have a round hole, and the minute hand will have an oblong hole. The oblong hole just fits over the movements "I" post and than the nut goes on top to hold it down. The hands are measured by the minut...

    Clear

    H1: $0.89

Additional information

Weight 0.3 lbs
Threaded Post Length

5/16 Inch, 3/4 Inch

Pedulum Bob Diameter

2 1/8 Inch, 2 3/4 Inch, 3 1/2 Inch, Non Pendulum

Comparable products…

  • Chiming quartz clock movement with the best sound by clockworks.com #QU40 Chime Pendulum Clock Movement
    When replacing, you will need to measure the post on the old unit, so you can match it up with your new chiming quartz movement. The post is the part that goes through the dial (face) and mounts from the front. Chiming Quartz Clock Movements Assistance = 800-381-7458 Dial Thickness 1/16 inch thick 3/16 inch thick...

    Clear

    QU40P: $59.89