Clock Clicks & Rivets

September 19, 2018 11:35 am Published by Leave your thoughts

$9.89

50 Mixed sized clicks and rivets. Clicks hold the mainspring in the coiled position during and after winding the clock. Please use caution when working with mainsprings.

In stock

Clicks & Rivets

50 Mixed sized clicks and rivets. Clicks hold the mainspring in the coiled position during and after winding the clock. Please use caution when working with mainsprings.

Additional information

Weight 0.1 lbs

Comparable products…

  • Clock Repair Tapered Pins Clock Repair Tapered Pins
    Tapered Pins 100 Brass tapered pins with various diameters. These Clock Parts have many uses in clock repair. They attach some dials, movement plates, suspensions and sometimes hands on the clock....

    CP2: $14.89

  • Arbor Bushings Arbor Bushings
    These are bushings for winding arbors of larger clock movements. These are needed when the holes in the clock movement plates where the winders are become oval instead of round. Assortment of four bushings OD 09.8mm x ID 4.0mm OD 09.8mm x ID 7.8mm OD 10.8mm x ID 7.8mm OD 11.8mm x ID 7.8mm...

    CP26: $9.89

  • Clock Verge Assortment Clock Verge Assortment
    Verge Assortment A verge is what engages with the escape wheel. Variety pack of 9. Bend and cut them to fit your application. These are for escape wheels that are outside of the clock plates only....

    CP23: $14.89

  • Clock Clicks with Wires and Rivets Clock Clicks with Wires and Rivets
    Clicks, Wires & Rivets The wires are preinstalled on the 6 clicks and come with 6 rivets to attach them to the main wheel. Used on many American 8 day time/strike movements. Use caution and read up first in our Ebook before working with mainsprings....

    CP27: $9.89

  • Clock Hex Nut Assortment Clock Hex Nut Assortment
    Clock Nuts This is an assortment of 100 various sized clock hex nuts that are common in clock repair. These will not fit German movements, but more for the USA units....

    CP18: $9.89

  • Clock Hairspring Assortment Clock Hairspring Assortment
    Clock Hairsprings Assortment of 72 clock hairsprings with there collets. There are various sized springs as well as various sized collet diameters in the center....

    CP22: $29.89

  • Hermle Clock Moon Gear Hermle Clock Moon Gear
    Hermle Moon Gear Moon gear for Hermle floor clocks. Please choose your movement number from the back plate of the movement itself....

    Clear

    CP25: $14.89$19.89

  • Clock Movement Mounts Dog Ear Style Clock Movement Mounts Dog Ear Style
    Movement Brackets Dog ear shaped movement mounts. For front mount pendulum or balance German movements. Comes as a set of four....

    CP29: $14.89

  • Clock Machine Style Screws Clock Machine Style Screws
    Machine Screws Smaller machine style screw assortment that comes in a pack of 50. ...

    CP21: $9.89

  • Clock 500pc Wood Screw Assortment Clock 500pc Wood Screw Assortment
    500pc Wood Screw Ast A very large assortment of smaller sized wood screws all brass tone for case work or movement mounting. This is the best assortment for mounting mantle or cuckoo clock sized clock movements....

    CP19: $14.89

  • Clock Movement Seat Board Screws Clock Movement Seat Board Screws
    Seat Board Mounts For modern German floor clock models that have a seat board. The rectangle washer goes under the seatboard and the screw goes up through it and into the movement posts. Comes as a pair of washers and screws as seen....

    Clear

    CP28: $14.89$19.89

  • Clock Bushing Assortment Clock Bushing Assortment
    Mix Bushings Solid brass bushings in a pack of 100 assorted outside and inside diameters. Bushings are needed when the pivot holes become oblong instead of round....

    CP20: $14.89