Clock Repair Closing Punches 7pc

$72.00

Closing Punch Set

This set consists of 7 pieces. Use these punches to decrease the hole diameter in the brass plate of the clock movement.

SKU: CT12 Category:
Read more »

In stock

CT12: $72.00

Clock Repair Closing Punches 7pc

This clock repair closing punch set contains 7 pieces. Hence, use this tool when completing a repair to decrease a hole diameter in a brass plate. For example, you use a cutting broach and increase the size of the pivot hole diameter too much. Then, to correct this problem, choose one of the punches to decrease the size of the hole. The diameter needs to be small enough so that a bushing will fit into the hole. A bushing goes into the hole by friction fit.

Additional information

Weight1.125 lbs
Dimensions2 × 2 × 4 in

You may also like…

  • launch

    View Product

    View more

    turned_in_out Clock Tools

    Clock Repair Staking Set

    A beautiful set that sits inside a wood container and has a hinged top lid for use in clock repair. These sturdy stakes have various hole diameters in the ends to fit the task at hand.

    CT22: $88.00
  • launch

    View Product

    View more

    turned_in_out Clock Tools

    Clock Repair Punch Set

    This punch Set has 16 Pieces of anvils and stakes for clockmakers. 16 assorted punches: 4 flat-faced hollow, 10 round-faced hollow and 2 assorted hole closing sizes. Large hardened steel anvil with 10 holes of graduated sizes.

    CT19: $109.00
  • launch

    View Product

    View more

    turned_in_out Clock Tools

    Clock Repair Closing Punches 7pc

    This set consists of 7 pieces. Use these punches to decrease the hole diameter in the brass plate of the clock movement.

    CT12: $72.00
  • launch

    View Product

    View more

    turned_in_out Clock Tools

    Clock Mainspring Clamps 4PC

    Comes in a set of 4 to keep a mainspring in the wound position. This keeps them under control while replacing them in the movement or barrel. Best to get two of these sets in order to have a pair with the correct size for the mainspring.

    CT2: $17.00

0
Ask a Clock Question

Subscribe
Notify of
guest
Inline Feedbacks
View all comments