Clock Repair Cutting Broaches
$45.00
Clock Repair Cutting Broaches
Use this item to ream out a pivot hole to accept a bushing in clock repair. Ream the hole larger to install a new round bushing via friction fit. 10pc set see specs below.
$45.00
SKU: CT11
Categories: All Products, Clock Tools, Clock Repair Tools
Ships From: USA
Sold By: Clockworks Inc.
Returns: 30-day return policy
Secure Payment: Shop with confidence
Cutting Broaches
Use Clock repair cutting broaches to ream out a pivot hole to accept a bushing. Ream the hole a bit larger so that a new round bushing can be out in via friction fit. Also use it to increase a bushing hole diameter as well.
Comes in two different size sets. Sold as a 10 pc set with these sizes 0.90mm to 4.00mm and 4 1/2 inches in length. These are the sizes most needed for most clocks, with the exception of winding arbor holes.
| Weight | 0.25 lbs |
|---|
Related Articles
Frequently bought together
You may also like…
just To be sure this is used for opening up the worn pivots to install a new bushing? If so what are the sizes
Yes it will open the hole to be a larger hole, so the bushing can go in.
Sizes are variable dependent on how deep the broaching with the tool.
These are not large enough for winder arbors, but yes to the rest.
James Stoudenmire
40yr Clockmaker
Author of Clockworks.com
where can i buy a bushing install kit
Out of stock at this time please check back in 6 months
James Stoudenmire
40yr Clockmaker
Author of Clockworks.com
Thanks.
No problem, enjoy
James Stoudenmire
30yr Clockmaker
Author of Clockworks.com
I second Don Hall’s question. How are we supposed to order if we don’t know what we’ll be getting??
What are the sizes included with the Large, and Small broach sets?