Solid wood deer head for the head dressing on a hunter style cuckoo clock. It is common for the ears to break off and get lost. Deer heads are measured ear to ear. Sizes may vary slightly. Antlers are sold separately.
2 3/8 Inch (6cm) Best with 6 3/4 (17cm) or 8 3/4 (23cm) Hunter Crown, 2 3/4 Inch (7cm) Best with 12 inch (31cm) Hunter Crown, 3 1/4 Inch (8cm) Best with 14 1/2 inch (37cm) Hunter Crown, 5 1/2 Inch (14cm) Best with 18 inch (46cm) Hunter Crown
Unstained Wooden Cuckoo Clock Bird
Unstained wooden cuckoo clock bird with a mouth that opens when the tail is lifted. 3 1/2 inches (90mm) long and 1/2 inch (13mm) wide. Comes with its mount and set screw....
Cuckoo Clock Oompah Band Four Figurines
Cuckoo Clock Umpah Band Four Figurines sold as a set. These guys stand 2 1/4 inches (55mm) Tall and 1 inch (25mm) wide....
Pendulum Stick Only for Cuckoo Clocks
Replacement pendulum stick for cuckoo clocks. It is common for these to break by being stepped on or for whatever other reason. If the pendulum is to break it would be the stick not the leaf, so we offer these replacement pendulum sticks. Also good for those making there own custom leaf bob....
RC2: $4.89 – $9.89
Cuckoo Clock Deer for the Head Dressing
DIY Build your own Cuckoo Clock Solid wood deer head for the head dressing on a hunter style cuckoo clock. It is common for the ears to break off and get lost, this deer is the perfect solid replacement. Deer heads are measured ear to ear. Please choose your size. Antlers are sold separately. Check them out her...
Cuckoo Clock Figurine the Beer Drinker
Cuckoo Clock Figurine the Beer Drinker with a moving arm. This arm will make the beer drinker drink his beer via the clock movement. He stands 3 inches (76mm) tall and 1 1/2 inches (38mm) wide. There is a choice between a left handed or right handed figure. On the side that does not have an arm is is flat with a wire that moves the other arm with the beer....
Solid Wood Deer Front Case Decoration for a Cuckoo Clock
Solid Wood Deer Front Case Decoration for a Cuckoo Clock. Stands 4 7/8 inches (124mm) tall and 4 inches (1023=mm) wide....
Small Boat Figurine Decoration for Cuckoo Clocks
Boat figurine for a cuckoo clock that has the fishing theme. This decoration would just get glued onto the cuckoo clock case with clear epoxy that is sold separately. 4 1/4 inch (108mm) long and 1 7/8 inch (48mm) wide....
Life Like Cuckoo Clock Bird with Feathers
A life like cuckoo clock bird with feathers. This is a nice upgrade from the old plastic kind and can be used to replace the old style. This comes with its mounting bracket and set screw. The bird is 3/8 inch (10mm) Wide and 3 1/8 inch (78mm) long....
Solid Wood Antlers Set for a Hunter Style Cuckoo Clock
Solid wood cuckoo clock antlers set of two for a hunter style cuckoo clock deer head....
Deer Mother and Baby Figure for Cuckoo Clocks
Deer mother and baby figurine statue decoration for a cuckoo clock. This is a decoration for a cuckoo clock case that can be installed with clear epoxy. Stands 2 Inches (25mm) tall and 2 inches (25mm) wide....
Cuckoo Clock Dancer Figurine Couple
Cuckoo clock dancing man and woman figurine for the dancer platform. Sold as replacements for the broken and missing usually. These have a small hole on the bottom for the pin that sticks out the dancer platform to go into. Can also be glued on with clear epoxy sold separately. This dancing couple stands 1 1/2 inches (38mm) tall and 3/4 inch (19mm) wide. Usually a cuckoo dancer platform will take four of these, we se...
Hunter Cuckoo Clock Replacement Wooden Horn
Hunter Cuckoo Clock Replacement Wooden Horn. These often get lost or broken so we offer these solid wood brown stained replacements. Measurements below are the diameter of the horn....