All Clock Parts
Shop by Category
- All Products
- Clock Movements
- Mechanical Movements
- Hermle Clock Movements
- 130/131 Hermle Clock Movement
- Hermle Clock Movement 140/141
- 241 Hermle Clock Movement
- 261 Hermle Clock Movement
- 340/341 Hermle Clock Movement
- 350/351 Hermle Clock Movement
- 451 Hermle Clock Movement
- 461 Hermle Clock Movement
- Hermle Clock Movement 1050/1051
- 1151 Hermle Clock Movement
- 1161 Hermle Clock Movement
- 1171 Hermle Clock Movement
- Kieninger Clock Movement
- Urgos Clock Movements
- Jauch Clock Movement
- American Clock Movement Reproductions
- Cuckoo Clock Movement
- Mechanical Clock Kits
- Clock Parts
- Spring Driven Movements
- Weight Driven Movements
- Grandmother Clock Kits
- Grandfather Clock Kits
- Hermle Clock Movements
- Ships Bell Alternatives
- Mechanical Movements
- Clock Repair Tools
- Watch Repair
- Battery Operated Clock Movements
- All Clock Parts
- Clock Dials
- Mechanical Grandfather Clock Weights
- Mechanical Clock Chime Rods
- Chime Accessories
- German Mechanical Clock Pendulums
- Hardware for Clocks
- Clock Keys and Cranks
- Cuckoo Clock Parts
- 400 Day Clock Parts
- Clock Hands
- Bushings
- Mainsprings
- Small Specialty Pendulums
- Quartz Clock Second Hands
- Super Long Clock Hands
- Repair Books
- Clockworks Clock Repair Service
- White Glove Delivery
- Booking service
Showing 113–128 of 325 results
turned_in_out Cuckoo Clock Parts
Cuckoo Bellow Top Epoxy AdhesiveCuckoo bellow tops use epoxy when replacing a worn top with a new one. The epoxy also works well to glue broken cuckoo wood case parts back together.
turned_in_out Cuckoo Clock Parts
Cuckoo Chain Hook SetInstallation of the cuckoo chain hook and ring set is easy. Each link on the chain is only a wire folded into a unsoldered loop only. With two needle nose pliers a simple twist is all that is is needed to open the link.
turned_in_out Cuckoo Clock Parts
Cuckoo Clock Bellow TopsIf the tubes are still in good condition, simply replace the torn bellow tops. Measure the length and width to order the correct size. These are sold in pairs.
CU4: $20.00View Productturned_in_out Cuckoo Clock Parts
Cuckoo Clock Bird DoorCuckoo clock wooden door for the bird to come out of. This wood door has its hinge wire and also the hook on the back for the bird wire to go through installed. It stands 1 1/8 inch (29mm) tall and 1 inch (25mm) wide.
turned_in_out Cuckoo Clock Parts
Cuckoo Clock Bird Unstained-WoodUnstained wooden cuckoo clock bird. 3 1/2 inches (90mm) long and 1/2 inch (13mm) wide. Comes with its mount and set screw.
turned_in_out Cuckoo Clock Parts
Cuckoo Clock Blonde Bird-TopHand carved pine wood cuckoo clock rooftop decorative wooden piece 6 3/4 wide made in Germany. Blonde top with walnut brown highlights on maple leaves and a bird at the top of the roof.
turned_in_out Cuckoo Clock Parts
Cuckoo Clock Carved-Maple-Leaf FrontDark pine wood maple leaf cuckoo clock front plate. Measures 7.5 inches across and 10.5 inches tall at its longest points. The inner dimensions are 4.5 inches across and about 6.5 inches tall.
turned_in_out Cuckoo Clock Parts
Cuckoo Clock Chimney RoofCuckoo Clock Chimney Roof . Gorgeous carved wood hand painted and stained for a glossy dark finish. Features a chimney sweep figurine pops out of chimney! Measures about 10 inches wide and 6 inches across from its longest points.
turned_in_out Cuckoo Clock Parts
Cuckoo Clock Decoration BoatA well made plastic cuckoo clock decoration boat. Boat figurine for a cuckoo clock that has the fishing theme. This decoration would just get glued onto the cuckoo clock case with clear epoxy that is sold separately.
turned_in_out Cuckoo Clock Parts
Cuckoo Clock Decoration Log-PileCuckoo clock decoration log-pile. A stack of wood logs for a cuckoo clock to decorate the case. To be used usually with the wood chopper figurine on a cuckoo clock. Measures 1 1/2 inches (38mm) tall and 1 1/2 inches (38mm) long.
turned_in_out Cuckoo Clock Parts
Cuckoo Clock Deer AntlersCuckoo clock deer antlers made of sturdy plastic with a wooden look. These plastic antlers will not break as easy as the old wooden antlers.
CU7: $12.00 - $19.20View Productturned_in_out Cuckoo Clock Parts
Cuckoo Clock Deer FigurineCuckoo clock figurine deer or buck made of wood. This stands 3 inches (8cm) tall and 2 inches (5cm) long.
turned_in_out Cuckoo Clock Parts
Cuckoo Clock Deer-Front DecorationCuckoo Clock Deer-Front Decoration Solid Wood Deer Front Case Decoration for a Cuckoo Clock. Stands 4 7/8 inches (124mm) tall and 4 inches (1023=mm) wide.
turned_in_out Cuckoo Clock Parts
Cuckoo Clock Deer-Head DecorationSolid wood deer head for the head dressing on a hunter style cuckoo clock. It is common for the ears to break off and get lost, this deer is the perfect solid replacement. Deer heads are measured from ear to ear.
RC10:View Productturned_in_out Cuckoo Clock Parts
Cuckoo Clock Elk TopDark pine wood hunter style cuckoo clock rooftop piece. Features an elk standing on top over carved decorative maple leaves. A unique addition to any woodworkers collection for creating timepieces.
turned_in_out Cuckoo Clock Parts
Cuckoo Clock Figurine Beer-DrinkerCuckoo Clock Figurine the Beer Drinker with a moving arm. This arm will make the beer drinker drink his beer via the clock movement. He stands 3 inches (76mm) tall and 1 1/2 inches (38mm) wide. There is a choice between a left or right handed
RC19: $18.00View ProductShop By Brand
Our Associations