All Clock Parts
Shop by Category
- All Products
- Clock Movements
- Mechanical Movements
- Hermle Clock Movements
- 130/131 Hermle Clock Movement
- Hermle Clock Movement 140/141
- 241 Hermle Clock Movement
- 261 Hermle Clock Movement
- 340/341 Hermle Clock Movement
- 350/351 Hermle Clock Movement
- 451 Hermle Clock Movement
- 461 Hermle Clock Movement
- Hermle Clock Movement 1050/1051
- 1151 Hermle Clock Movement
- 1161 Hermle Clock Movement
- 1171 Hermle Clock Movement
- Kieninger Clock Movement
- Urgos Clock Movements
- Jauch Clock Movement
- American Clock Movement Reproductions
- Cuckoo Clock Movement
- Mechanical Clock Kits
- Clock Parts
- Spring Driven Movements
- Weight Driven Movements
- Grandmother Clock Kits
- Grandfather Clock Kits
- Hermle Clock Movements
- Ships Bell Alternatives
- Mechanical Movements
- Clock Repair Tools
- Watch Repair
- Battery Operated Clock Movements
- All Clock Parts
- Clock Dials
- Mechanical Grandfather Clock Weights
- Mechanical Clock Chime Rods
- Chime Accessories
- German Mechanical Clock Pendulums
- Hardware for Clocks
- Clock Keys and Cranks
- Cuckoo Clock Parts
- 400 Day Clock Parts
- Clock Hands
- Bushings
- Mainsprings
- Small Specialty Pendulums
- Quartz Clock Second Hands
- Super Long Clock Hands
- Repair Books
- Clockworks Clock Repair Service
- White Glove Delivery
- Booking service
Showing 81–96 of 326 results
turned_in_out Case / Mounting Parts
Clock Chime block MountsThese are the screws and washers that mounts the chime block to the clock case. The chime block has threaded holes usually and these screws go through the case and into the chime block. These are the universal thread size for most chime blocks.
turned_in_out Hardware for Clocks
Clock Chime Selector RodClock chime selector rod provides an alternative to the chime selection switch. (The switch that would typically come through the dial at 3 o'clock.)
SelectorRod: $15.00View Productturned_in_out Mechanical Clock Chime Rods
Clock Chime-Block Side Strike with HardwareThis is a Clock Chime-Block for a Side Strike mechanical clock movement. Available in 5 rod for Westminster units or 8 rods for Triple Chime clock movements. The length is the longest rod within the block from end to end.
turned_in_out Hardware for Clocks
Clock Click Spring Assortment 33PCSmall clock click spring assortment, these hold the click so the clock will wind in only one direction. There are 33 springs in the assortment. Will fit many Antique German, American, and French clock movements.
turned_in_out Hardware for Clocks
Clock Clicks Rivets AssortmentAn assortment of 50 piece click and rivets for mechanical clocks. These are useful to use on antique spring driven American time strike clock movements. Not easy to find the proper click on these units, but this assortment usually solves the problem.
turned_in_out Hardware for Clocks
Clock Clicks Wires RivetsThe wires are preinstalled on the 6 clicks along with 6 rivets to install them on the clock. Used on many American 8 day time and strike spring driven movements. When winding a spring driven clock one can hear the clicking noise from the ratchet wheel.
turned_in_out Hardware for Clocks
Clock Count Wheel ClipsThree pack of count wheel clips for American made mechanical clocks. These clips hold the count wheel to the main wheel on a Antique time and strike clock movement.
turned_in_out Hardware for Clocks
Clock Dial Key GrommetsThree winding hole key grommets 3pk to be used on a clock dial with a 3/8 wide hole. They are to be installed on the dial after drilling out the winding arbor holes.
turned_in_out Cuckoo Clock Parts
Clock E-Style Clip WashersSplit Clock E-Style clip Washers are similar to C clips as they attach various parts to the movement. These E-style clip washers get lost frequently as they are small and tend to fly off when removed.
turned_in_out Hardware for Clocks
Clock Hand Washer Assortment100 Assorted mixed clock hand washers used on antique wall and mantle clocks. These go on top the minute hand on some clocks to maintain tension so the hand does not move around.
turned_in_out Hardware for Clocks
Clock Hex Nut AssortmentThis is an assortment of 100 various sizes of clock hex nuts that are common in clock repair. These hex nuts fit many of the common antique American time and strike mechanical clock movements.
turned_in_out Clock Keys and Cranks
Clock Key Size GaugeA pile of unmarked clock keys may pile up in a mans lifetime. Not all the keys will be marked as to what size they are. This is a useful tool in this situation, it will let one know what the size clock key it is.
turned_in_out Hardware for Clocks
Clock Machine Style ScrewsSmaller machine style screw assortment that comes in a pack of 50. It is not always easy to find the right screw so this is an assortment of sizes that may work. Machine style clock screws that may fit a variety of clocks produced in the 1900's.
turned_in_out Case / Mounting Parts
Clock Movement Bar Mounts set of 4Clock movement bar mounts are flat stainless steel stock that mounts to the back of the clock movement. This allows you to have a unit that mounts in the rear. The nut comes off the pillar of the movement (one at a time so it does not disassemble). Then put this on the post, and lock it on with the... View Product
turned_in_out Case / Mounting Parts
Clock Movement Mounting Brackets Dog-Ear StyleSet of four dog ear shaped clock movement mounting brackets. These go onto the outer movement posts under the hex nut on each corner. By installing only one corner at a time the movement with its gears never come apart.
turned_in_out Case / Mounting Parts
Clock Movement Seat-Board ScrewsClock Movement Seat-Board Screws are for modern German floor clock models that have a seat-board. The rectangle washer goes under the seat-board and the screw goes up through it and into the movement posts. Sold as a pair of washers and 1 3/4 inch long screws.
CP28: $15.00 - $25.00View ProductShop By Brand
Our Associations