Kieninger Style Clock Click Spring

September 19, 2018 11:35 am Published by Leave your thoughts

$9.89

Kieninger Click Spring

Single Kieninger click spring for modern German mantle movements. 1 1/16 long

In stock

Kieninger Click Spring

Single Kieninger click spring for modern German mantle movements. 1 1/16 long

Additional information

Weight 0.1 lbs

Comparable products…

  • 33PC Clock Click Spring Assortment 33PC Clock Click Spring Assortment
    33PC Click Spring Assortment These are the small springs that hold the click into the click wheel so the clock will wind in only one direction. There are 33 springs in the assortment. These are mixed springs for German, French and more....

    CP36: $29.89

  • Clock Hand Washer Assortment Clock Hand Washer Assortment
    Clock Hand Washers 100 Assorted mixed clock hand washers. These go on top the minute hand on some clocks to maintain tension so the hand does not flop around. Item #CP7 $6...

    CP7: $9.89

  • Clock Repair Movement Assembley Post Set Clock Repair Movement Assembley Post Set
    Keeps the movement up and stable during an overhaul. Just tighten one post on each corner to work on the clock movement as its in the air. Set of 4 posts 2 3/4' long. Includes a hanging bracket to hang the movement for wwwing ...

    CT10: $24.89

  • Kieninger Style Clock Click Spring Kieninger Style Clock Click Spring
    Kieninger Click Spring Single Kieninger click spring for modern German mantle movements. 1 1/16 long...

    CP34: $9.89

  • Clock Clicks & Rivets Clock Clicks & Rivets
    Clicks & Rivets 50 Mixed sized clicks and rivets. Clicks hold the mainspring in the coiled position during and after winding the clock. Please use caution when working with mainsprings....

    CP5: $9.89

  • Clock Loop End Mainspring Winder Tool Clock Loop End Mainspring Winder Tool
    Winder for loop end mainsprings, to be used with the mainspring clamps. This is to take a unwound loop end mainspring and wind it up to get a clamp on. When the C clamp is on, it is much easier to manage in the clock movement assembly process. There is no 'safe' operation on this one. It is both dangerous and tricky. You would use the great wheel, put it through the hole in the device, clamp it down with something...

    CT1: $14.89

  • Small Springs For Clock Repair Small Springs For Clock Repair
    Small Springs Assortment of small springs that can be used with clocks. These are not made for clocks but are very useful to modify for clock repair....

    CP42: $4.89

  • Bracket Clock Handle Bracket Clock Handle
    3 1/2 inch wide, 1 1/2 inch tall, solid brass Bracket Clock top handle. A Bracket clock is a square clock with a square dial, this is the handle that mounts to the top of the clock case. ...

    CP43: $29.89

  • Tall Case Pulley Tall Case Pulley
    Pulley for the tall case antique clock. This is useful for the cable driven antique clocks for the cable to loop through and the weight to hang on....

    CP41: $19.89

  • German Hand Nuts German Hand Nuts
    German Hand Nuts 12 Assorted hand nuts for German movements. With this assortment of hand nuts you will get one for your German movement with no problem. However these hand nuts will not work on a cuckoo clock those are under cuckoo parts....

    CP9: $9.89

  • Clock Pendulum Nut Assortment Clock Pendulum Nut Assortment
    Pendulum Nuts Pendulum nut assortment of 6 for floor clocks and wall clocks. Turning the nut so to raise the bob will speed up the clocks time, lowering the bob will slow the clocks time....

    CP8: $14.89

  • Clock Repair Large Cutting Broach Set Clock Repair Large Cutting Broach Set
    The cutting broach is the tool that is used to ream out a pivot hole to accept a bushing. The hole gets reamed larger to be able to install the new round bushing. Also to increase a bushing hole diameter as well. Comes in two sized sets, the smaller one is used for alarm clocks or large pocket watches....

    CT11: $34.89