Short and Long Drop Time Strike Clock Movement

September 19, 2018 3:37 pm Published by Leave your thoughts

$169.00$199.00

The drop on these units end up being 12-14 inch for the short drop to 17-19 inch on the long drop where the clock will keep time. The drop means the pendulum length from the hands shaft and all the way down to the very bottom of the pendulum nut threads. These are very popular wall clocks that will sometimes have assorted pendulum styles, but usually just an adjustable bob hanging off a wire hook, they all have the wire with the built in suspension spring steel at the top. If replacing a unit, your pendulum will work as long as the drop is the same, by altering the suspension wire and/or the pendulum to create the correct overall length from the hand shaft and all the way down the pendulum.

Clear
The drop on these units end up being 12-14 inch for the short drop to 17-19 inch on the long drop where the clock will keep time. The drop means the pendulum length from the hands shaft and all the way down to the very bottom of the pendulum nut threads. These are very popular wall clocks that will sometimes have assorted pendulum styles, but usually just an adjustable bob hanging off a wire hook, they all have the wire with the built in suspension spring steel at the top. If replacing a unit, your pendulum will work as long as the drop is the same, by altering the suspension wire and/or the pendulum to create the correct overall length from the hand shaft and all the way down the pendulum.
  • Plates: 5 1/4' x 3 5/8'
  • Min case width 5'
  • Min depth: 3 3/4'
  • Hand Shaft 2'
  • Front pendulum

Additional information

Weight 2 lbs
Kit Option

Short drop movement Only, Short drop movement Kit, Long drop movement, Long drop movement kit

Comparable products…

  • Antique Kitchen Clock Replacement Movement Antique Kitchen Clock Replacement Movement
    Very popular table clock movement dimensions on Kitchen or Gingerbread cases. The drop means the clock will have an overall pendulum length described below at the place where it will keep the right time. If replacing a unit, your pendulum will work as long as the drop is the same, or made the same, by altering the suspension wire and/or the pendulum to create the correct overall length from the hand shaft. Pl...

    Clear

    MVT2: $169.00$199.00

  • Short Drop Time Strike Clock Movement Short and Long Drop Time Strike Clock Movement
    The drop on these units end up being 12-14 inch for the short drop to 17-19 inch on the long drop where the clock will keep time. The drop means the pendulum length from the hands shaft and all the way down to the very bottom of the pendulum nut threads. These are very popular wall clocks that will sometimes have assorted pendulum styles, but usually just an adjustable bob hanging off a wire hook, they all have the w...

    Clear

    MVT1: $169.00$199.00

  • Antique Mantle Clock Replacement Movement Antique Mantle Clock Replacement Movement
    Very popular mantle clock movement that will mount in the front of the clock on the dial side going in from the back of the clock case. The drop means the clock will have a shorter overall pendulum length as described above at the place where it will keep the right time. These measurements on the movement is a very popular replica of the Mantle clock movements produced in America in the early 1900s. You will need ...

    Clear

    MVT3: $169.00$199.00