$9.89 – $14.89
Style A and B are for antique tall case clock movements.
Suspension C is the most popular as it covers many antique and antique replica wall and mantle clock movements.
Please note style C comes as a three pack as they have to be cut and bent to fit, and so we provide three units to get it the perfect shape and length.
A = English / Early American 5 3/8, B = English / Early American 4 11/16, C = 3 springs / rods 17inch cut to fit
Clock Bubble Level
Bubble level for help to put a clock into beat or just level it for an even tick tock. If the clock is showing level but the tick and the tock are not even, please read 'how to put a clock in beat' in the help sections. ...
Clock Mainspring Let Down Tool Set of 4
Handle with 3 chucks covers about every key size. Put the chuck into the handle and then release the mainspring in a slow controlled manner in your grip. This is done by putting the tool onto the key post arbor and then ...
Clock Repair Staking Set
Clock Staking Set in a wooden closable container. These sturdy stakes have various hole diameters in the ends to fit the task at hand. ...
Clock Mainspring Let Down Tool Set of 2
Used to release the power in a wound up mainspring. Key goes into the chuck and the chuck goes into the handle so you can let down the power of the spring. It does the same job as the let down with all the chucks. If som ...
0-25mm Micrometer for Clock Repair
Readings of 0-25mm micrometer. Good for reading the diameter or thickness of many clock parts. ...
Clock Repair Small Plier Set
6pc pliers with various shaped ends for crimping or cutting. Very useful to get into tight places when locking in pivots or wire bending. ...
Screw Drivers Set of 6 LONG for Cuckoo and Clock Repair
These are the best set to remove movements from there clock cases. They reach into the mantle clock cases and cuckoo cases very well. It is not easy to find a perfect length screwdriver with the right size head. ...
Clock Repair Movement Test Stand
Works great on testing mantle or wall clock movements. Durable, practical, adjustable and well made. ...
Clock Repair Tool and Part Magnetizer and Demagnetizer
This tool is easy to use and very effective. Stick the tool through it and the tool is now magnetized. Do it again and the tool is now demagnetized. Works great with the Multi-tip screwdriver. ...
Oiler & Oil
Precision pen oiler that is filled with cuckoo clock oil. The applicator makes it easy to oil hard to reach pivot holes. ...
Multiple Tip Screw Driver for Clock Repair
It is very useful to have a spinning top and be able to switch from various tips that are stored within the handle itself. Works great with the magnitizer we offer. ...