Clock Cleaning Kit-Weight Driven

April 2, 2019 7:51 pm Published by Leave your thoughts

$49.00

Our Clock cleaning Kit offers the basic items required to clean a clock movement without disassembly. Cleaning without dis assembly is not as effective as breaking down the movement, but it is sufficient in most cases. Not everyone is ready to break down their clock movement and put it back together.

This kit is for the person who would like to do a simple clock cleaning with out having to learn an intense amount of clock repair information or Horology. The goal to cleaning a clock movement is to remove old oil that has solidified and put new oil in its place. Solidified clock oil creates wear to the movements outer plates and eventually causes to much friction for the clock to run.

Clock Cleaning Kit Description

Our Clock cleaning Kit offers the basic items required to clean a clock movement without disassembly. Cleaning without dis assembly is not as effective as breaking down the movement, but it is sufficient in most cases. Not everyone is ready to break down their clock movement and put it back together. This kit is for the person who would like to do a simple clock cleaning with out having to learn an intense amount of clock repair information or Horology. The goal to cleaning a clock movement is to remove old oil that has solidified and put new oil in its place. Solidified clock oil creates wear to the movements outer plates and eventually causes to much friction for the clock to run.
Clock Cleaning Kit
Included:

Clock Repair E-Book

Downloadable Ebook that includes the following topics:
The success of this E-Book is from the simplicity in the answers and the ease of use. This will make it very easy for the clock owner to solve simple problems that may arise when there is an issue with the clock.
The topics you see below are the actual topics that are presented on the cover page of the E-Book. Please review them and see if this E-Book will help you. You will find this very helpful in solving many different clock repair issues and questions on cleaning and oiling a movement.
Weight Driven Clock Repair

Weight Driven

  • Introduction
  • Putting it "In Beat"
  • Ticks ok but stops
  • No tick tock sound
  • Quarter chime is off
  • Cleaning - Assembled
  • Cleaning - Disassembled
  • Reassembling the works
  • Repair methods
  • Replacing with a new movement
Spring Driven clock repair

Spring Driven

  • Introduction
  • Putting it "In Beat"
  • Ticks ok but stops
  • No tick tock sound
  • Working with mainsprings
  • Chiming the wrong time
  • Setting quarter chimes
  • Cleaning - Assembled
  • Cleaning - Disassembled
  • Reassembling the works
  • Repair methods
  • Replacing with a new movement
400 Day Clock Repair

Anniversary Clocks

  • Introduction
  • Setting up the clock
  • Changing Suspensions
  • Putting it "In Beat"
  • Cleaning the Movement
  • Reassembling the works
cuckoo clock repair

Cuckoo Clocks

  • Introduction
  • Parts Check
  • Checking for Wear
  • Replacing Bellows
  • Replacing Bellow Cloth
  • Putting it "In Beat"
  • Not Cuckooing at the Right Time
  • Cuckooing the Wrong Amount
  • Movement Removal and Installation
  • New Cuckoo Set-Up
  • Changing the Hands
  • Cleaning the Movement
Also Included:
Clock Clock Cleaning SolutionClock Cleaning Kit includes One pint of concentrated ammoniated clock cleaning solution that can be used to clean movements by hand, or to use with a ultrasonic cleaning machine. Just mix 1 part of this solution to 6 parts of water to clean old clock oil from the movement. The E-book that is included with this kit has instructions on how to clean the clock movement in the best and safest way, so refer to it before starting the cleaning process.
Clock Brass Bristle BrushBeautiful brass bristle brush which brings bright beauty to big bulky brass plates. This is to be used on stubborn spots of grime, to be used with cleaning solution.
Clock Vision VisorClock Cleaning Kit includes This magnifier can be worn over glasses. This fits over the head and will be the most convenient magnification for inspecting important components of the clock movement and parts. This quality tool is made here in USA and is a must for this type of work. This flips up over the head when there is an interruption in your work and has 2 1/2 magnification power.
Clock Oiler with OilThe oiler is full of oil and are the size of a fat pen. A Small amount of oil gets applied to anything that has friction after the old oil is cleaned off. This is enough clock oil to do many clock movements.
Clock Clock Gear / Hand PullerThis is used to pull gears or hands off clocks in a straight and safe fashion. With 400 day clocks in particular, the hour hand sometimes is difficult to get off. Doing it by hand could increase the hour hand holes diameter and the hand will not fit back on correctly because it would be touching the dial. Using this simple tool prevents this from happening.
Clock Clock LevelThe level is needed to be sure the clock stays in beat from one place to another. Learn to set the clock in beat by the directions in the E-book, making sure the clock is level when it is being done. Then keep a level with the clock and where ever the clock goes, as long as its level, it will be in beat. By being in beat, it means to have an even tick-tock-tick-tock rather than ticktock---ticktock---ticktock. Often many repairs ONLY need to be set in beat to work - however a cleaning is usually suggested anyhow.

Additional information

Weight 3 lbs

Comparable products…

  • Clock Bubble Level Clock Bubble Level
    Bubble level for help to put a clock into beat or just level it for an even tick tock. If the clock is showing level but the tick and the tock are not even, please read 'how to put a clock in beat' in the help sections. ...
    CT33: $4.89
  • Oiler & Oil Oiler & Oil
    Precision pen oiler that is filled with cuckoo clock oil. The applicator makes it easy to oil hard to reach pivot holes. ...
    CT3: $9.89
  • Clock Mainspring Let Down Tool Set of 2 Clock Mainspring Let Down Tool Set of 2
    Used to release the power in a wound up mainspring. Key goes into the chuck and the chuck goes into the handle so you can let down the power of the spring. It does the same job as the let down with all the chucks. If som ...
    CT26: $29.89
  • Clock Repair Movement Test Stand Clock Repair Movement Test Stand
    Works great on testing mantle or wall clock movements. Durable, practical, adjustable and well made. ...
    CT21: $74.89
  • Screw Drivers Set of 6 LONG for Cuckoo and Clock Repair Screw Drivers Set of 6 LONG for Cuckoo and Clock Repair
    These are the best set to remove movements from there clock cases. They reach into the mantle clock cases and cuckoo cases very well. It is not easy to find a perfect length screwdriver with the right size head. ...
    CT37: $9.89
  • Clock Mainspring Let Down Tool Set of 4 Clock Mainspring Let Down Tool Set of 4
    Handle with 3 chucks covers about every key size. Put the chuck into the handle and then release the mainspring in a slow controlled manner in your grip. This is done by putting the tool onto the key post arbor and then ...
    CT25: $34.89
  • Clock Repair Tool and Part Magnetizer and Demagnetizer Clock Repair Tool and Part Magnetizer and Demagnetizer
    This tool is easy to use and very effective. Stick the tool through it and the tool is now magnetized. Do it again and the tool is now demagnetized. Works great with the Multi-tip screwdriver. ...
    CT31: $9.89
  • Clock Repair Small Plier Set Clock Repair Small Plier Set
    6pc pliers with various shaped ends for crimping or cutting. Very useful to get into tight places when locking in pivots or wire bending. ...
    CT38: $14.89
  • 0-25mm Micrometer for Clock Repair 0-25mm Micrometer for Clock Repair
    Readings of 0-25mm micrometer. Good for reading the diameter or thickness of many clock parts. ...
    CT24: $14.89
  • Clock Repair Staking Set Clock Repair Staking Set
    Clock Staking Set in a wooden closable container. These sturdy stakes have various hole diameters in the ends to fit the task at hand. ...
    CT22: $54.89
  • Multiple Tip Screw Driver for Clock Repair Multiple Tip Screw Driver for Clock Repair
    It is very useful to have a spinning top and be able to switch from various tips that are stored within the handle itself. Works great with the magnitizer we offer. ...
    CT30: $14.89